Super Waterproof Brass Cable Gland (IP68)

Click Image for Gallery

Product Code	Size	Cable Diameter		Hole Diameter (mm)	Thread Length (mm)	Corner Diameter Ø (mm)
Product Code	Size	Min	Max	Hole Diameter (mm)	Thread Length (mm)	Corner Diameter Ø (mm)
Pg THREAD
R-MKR-P1	Pg7	3	6	14,5	6,0	15,5
R-MKR-P2	Pg9	4	8	17,2	7,0	19,0
R-MKR-P3	Pg11	5	10	20,6	6,0	22,0
R-MKR-P4	Pg13,5	6	12	22,4	7,0	24,5
R-MKR-P5	Pg16	10	14	24,5	6,5	26,5
R-MKR-P6	Pg21	13	18	30,3	7,0	33,5
R-MKR-P7	Pg29	18	25	39,0	8,0	44,5
R-MKR-P8	Pg36	22	32	49,0	9,0	55,5
R-MKR-P9	Pg42	30	38	56,0	12,0	66,5
R-MKR-P10	Pg48	34	44	61,3	14,0	69,5
METRIC THREAD
R-MKR-M1	M12x1,5	3	6	14,0	6,0	15,5
R-MKR-M2	M16x1,5	4	8	18,0	7,0	19,0
R-MKR-M3	M20x1,5	6	12	22,0	8,0	24,5
R-MKR-M4	M25x1,5	10	14	27,0	8,0	26,5
R-MKR-M5	M32x1,5	13	18	34,0	9,0	33,5
R-MKR-M6	M40x1,5	18	25	42,0	9,0	44,5
R-MKR-M7	M50x1,5	22	32	52,0	9,0	55,5
R-MKR-M8	M63x1,5	34	44	65,0	14,0	69,5
NPT THREAD
R-MKR-N1	3/8"	4	8	18,6	11,5	19,0
R-MKR-N2	1/2"	6	12	22,9	13,0	24,5
R-MKR-N3	3/4"	13	18	28,4	13,0	33,5
R-MKR-N4	1"	18	25	35,2	13,0	44,5

Certified by CE, GOST-R and EAC.
Conforms to EN 50262 standard.
Can also be produced from Stainless Steel.
Has a neoprene seal and a polyamide (PA6) clip.
The seal is resistant to temperatures from -40°C to +80°C. has an O-ring.
Physical properties stated in the table have to be considered with ±5% tolerance.
If requested can be produced in any desired size or with a special thread size.
The hole diameters specified in the lists are given adding ̴2 mm to the thread diameters.
Especially used in industrial environments in panel, motor etc. connections.
If desired can be used together with a connector protective cap and a grounding component.